[1]耿開博.鋁管、不銹鋼管的高頻感應焊接[J].焊管,2009,32(11):29-31.[doi:1001-3938(2009)11-0029-03]
 GENG Kai-bo.High-frequency Induction Welding of Aluminum and Stainless Steel Pipes[J].,2009,32(11):29-31.[doi:1001-3938(2009)11-0029-03]
點擊復制

鋁管、不銹鋼管的高頻感應焊接
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
32
期數:
2009年第11期
頁碼:
29-31
欄目:
工藝與設備
出版日期:
2009-11-28

文章信息/Info

Title:
High-frequency Induction Welding of Aluminum and Stainless Steel Pipes
文章編號:
1001-3938(2009)11-0029-03
作者:
耿開博
(保定紅星高頻設備有限公司,河北 保定 071000)
Author(s):
GENG Kai-bo
(Baoding Hongxing Hi-frequency Equipment Co.,Ltd.,Baoding 071000,Hebei,China)
關鍵詞:
鋁合金不銹鋼帶材焊管高頻感應焊接
Keywords:
aluminum alloystainless steelstripwelded pipehigh frequency induction welding
分類號:
TG448
DOI:
1001-3938(2009)11-0029-03
文獻標志碼:
B
摘要:
分析了涂鋁帶材、不銹鋼帶材的物理性質和力學性能。從焊管機組成型工藝、設備、模具加工精度、高頻電源和調速控制精度等方面介紹了鋁管和不銹鋼管高頻感應焊接的工藝特點,指出了焊接鋁管及不銹鋼管時具體的注意事項。
Abstract:
This article analyzed physical property,mechanical property of aluminized strip and stainless strip,introduced process characteristics of high frequency induction welding aluminum and stainless steel pipes from the following aspects,such as forming process of welded pipe units,machining precision of equipments and models,high frequency power and speed control precision.Finally,it pointed out the detailed cautions during the welding of aluminum and stainless steel pipes.

參考文獻/References:

[1]張則牲,寧道俊.高頻感應焊接薄壁不銹鋼管[J].焊接技術,1990(5):11-14.
[2]龔寶興.不銹鋼管的高頻感應焊接[J].上海冶金設計,1994(4):56-59.
[3]帥玉峰.1Cr18Ni9Ti奧氏體不銹鋼管高頻焊接工藝[J].鋼管,1988(4):40-43.
[4]夏越良.采用高頻電源焊接鋁管[J].焊管,2001,24(6):28-29.

相似文獻/References:

[1]許貴芝 編譯.不銹鋼與鈦合金的轉接管的焊接[J].焊管,2009,32(11):70.[doi:1001-3938(2009)11-0070-03]
 Edited and Translated by XU Gui-zhi.Welding Between Stainless Steel and Titanium Alloy Different Diameter Transfer Tube[J].,2009,32(11):70.[doi:1001-3938(2009)11-0070-03]
[2]許貴芝.提高鋁合金1370和1913焊接結構使用可靠性的途徑[J].焊管,2010,33(9):61.[doi:1001-3938(2010)09-0061-04]
 Edited and Translated by XU Gui-zhi.Methods to Improve Usage Reliability of 1370 and 1913 Aluminum Alloy Welded Constructions[J].,2010,33(11):61.[doi:1001-3938(2010)09-0061-04]
[3]蔣道頂,王寶金,陳 澤.軌道客車車頂架用多功能不銹鋼異形管成型工藝設計[J].焊管,2011,34(11):42.[doi:1001-3938(2011)11-0042-04]
 JIANG Dao-ding,WANG Bao-jin,CHEN Ze.Forming Process Design of Multifunctional Stainless Steel Special Pipe Used in the Ceiling Rack of Railway Passenger Train[J].,2011,34(11):42.[doi:1001-3938(2011)11-0042-04]
[4]張希川,李 健,張瑞濤,等.管道內壁不銹鋼焊條堆焊的耐腐蝕工藝研究[J].焊管,2012,35(8):9.[doi:1001-3938(2012)08-0009-04]
 ZHANG Xichuan,LI Jian,ZHANG Ruitao,et al.Research on Corrosion Resistance Process of Stainless Steel Electrode Overlaying Welding on the Inner Wall of Pipeline[J].,2012,35(11):9.[doi:1001-3938(2012)08-0009-04]
[5]吳通良.超長奧氏體不銹鋼焊管光亮固溶處理工藝改進[J].焊管,2013,36(7):34.[doi:1001-3938(2013)06-0034-04]
 WU Tongliang.Super-long Austenitic Stainless Steel Welded Steel Pipe Continuous Bright Bolid Solution Treatment Process Improvement[J].,2013,36(11):34.[doi:1001-3938(2013)06-0034-04]
[6]陳茂軍.MIG焊接6063鋁合金的工藝研究及缺陷預防[J].焊管,2013,36(9):52.[doi:1001-3938(2013)09-0052-02]
 CHEN Maojun.Study on the Process of MIG Welding of 6063 Aluminum Alloyand Defect Preventive Methods[J].,2013,36(11):52.[doi:1001-3938(2013)09-0052-02]
[7]付現橋,徐 敬,卜明哲,等.L360QS/316L不銹鋼復合鋼管焊接工藝和性能研究[J].焊管,2014,37(2):48.[doi:1001-3938(2014)02-0048-05]
 Fu Xianqiao,XU Jing,BU Mingzhe,et al.Welding Process and Performance Study on L360QS/316L Stainless Steel Clad Pipe[J].,2014,37(11):48.[doi:1001-3938(2014)02-0048-05]
[8]孫建新,胡瑞玲,王金鳳,等.車輛用鋁合金燃油箱MIG焊工藝分析與改進[J].焊管,2014,37(5):40.[doi:1001-3938(2014)05-0040-03]
 SUN Jianxin,HU Ruiling,WANG Jinfeng,et al.Process Analysis and Improvement of MIG Welding in Aluminum Alloy Fuel Tank for Vehicle[J].,2014,37(11):40.[doi:1001-3938(2014)05-0040-03]
[9]陳茂軍,靳全勝.TIG焊接不銹鋼管工藝對焊縫質量的影響[J].焊管,2014,37(7):46.[doi:1001-3938(2014)07-0046-03]
 CHEN Maojun,JIN Quansheng.Influence of TIG Welding Process for Stainless Steel Tube on Weld Quality[J].,2014,37(11):46.[doi:1001-3938(2014)07-0046-03]
[10]雷曉維,馮耀榮,張建勛,等.不銹鋼焊接接頭腐蝕行為研究進展[J].焊管,2015,38(2):37.[doi:1001-3938(2015)02-0037-05]
 LEI Xiaowei,FENG Yaorong,ZHANG Jianxun,et al.Research Progress of Corrosion Behavior of Stainless Steels Welded Joints[J].,2015,38(11):37.[doi:1001-3938(2015)02-0037-05]

備注/Memo

備注/Memo:
作者簡介:耿開博(1970- ),男,在保定紅星高頻設備有限公司從事技術研發和技術管理工作。
收稿日期:2009-06-29
更新日期/Last Update:
双色球胆码预测公式