[1]劉 陽,張貴鋒,王士元.鈦合金與不銹鋼異種金屬釬焊的研究進展[J].焊管,2019,42(3):1-7.[doi:10.19291/j.cnki.1001-3938.2019.3.001]
 LIU Yang,ZHANG Guifeng,WANG Shiyuan.Research Progress on Dissimilar Metal Brazing of Titanium Alloy and Stainless Steel[J].,2019,42(3):1-7.[doi:10.19291/j.cnki.1001-3938.2019.3.001]
點擊復制

鈦合金與不銹鋼異種金屬釬焊的研究進展()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
42
期數:
2019年第3期
頁碼:
1-7
欄目:
行業綜述
出版日期:
2019-03-28

文章信息/Info

Title:
Research Progress on Dissimilar Metal Brazing of Titanium Alloy and Stainless Steel
文章編號:
10.19291/j.cnki.1001-3938.2019.3.001
作者:
劉 陽張貴鋒王士元
西安交通大學金屬材料強度國家重點實驗室  焊接研究所, 西安710049
Author(s):
LIU Yang ZHANG Guifeng WANG Shiyuan
State Key Laboratory for Mechanical Behavior of Materials, Institute of Welding, Xi’an Jiaotong University,  Xi’an  710049, China
關鍵詞:
鈦合金不銹鋼異種金屬釬焊
Keywords:
titanium alloy stainless steel dissimilar metal brazing
分類號:
TG454
DOI:
10.19291/j.cnki.1001-3938.2019.3.001
文獻標志碼:
A
摘要:
為了解決鈦合金焊接性能和加工性能較差導致其在實際工程應用中受限的問題,提出了將鈦合金和不銹鋼復合使用的構想,并對鈦合金和不銹鋼的可焊性進行了分析。以鈦合金和不銹鋼釬焊為研究對象,重點論述了鈦合金與不銹鋼釬焊連接所用的釬料及釬焊工藝等的國內外研究現狀,發現通過釬焊來連接鈦合金與不銹鋼在焊接接頭質量、精度以及提高焊接生產效率等方面具有一定優勢,但依然存在接頭強度低、特殊條件下接頭性能不穩定等問題,需要從釬料設計出發,輔助釬焊工藝和設備的改進,根據不同的應用工況,設計出對應成分的釬料。
Abstract:
In order to solve the problems caused by the titanium alloy poor welding and machining performance limiting their practical engineering applications, the conception of compounding use of titanium alloy and stainless steel had been put forward, and the weldability of titanium alloy and stainless steel had been analyzed. It researched on the titanium alloy and stainless steel brazing, and mainly focused on domestic and foreign research situation of solder and brazing technology for titanium alloy and stainless steel brazing, titanium alloy and stainless steel brazing had advantages in welded joint quality, precision and improving welding production efficiency, but problems of low joint strength and unstable joint performance existed. It needed to base on solder design, improve auxiliary brazing technology and equipment, and design the solder composition according to different application conditions.

參考文獻/References:

[1] 何康生, 曹雄夫. 異種金屬焊接[M]. 北京:機械工業出版社, 1986.
[2] 萊茵斯C, 皮特爾斯M. 鈦與鈦合金[M].陳振華,嚴紅革,陳吉華,等譯. 北京:化學工業出版社, 2005.
[3] CHEN Y, CHEN S, LI L . Influence of interfacial reaction layer morphologies on crack initiation and propagation in Ti/Al joint by laser welding-brazing[J]. Materials & Design, 2010, 31(1):  227-233.
[4] 李梁, 孫健科, 孟祥軍. 鈦合金的應用現狀及發展前景[J]. 鈦工業進展, 2004, 21(5): 19-24.
[5] 彭瑾, 徐興柱, 藍仁恩. 巡航導彈中金屬結構材料的應用[J]. 飛航導彈, 2008(3): 54-58.
[6] 蘇鴻英. 鈦的工業應用前景[J]. 中國有色金屬, 2009(4):74-74.
[7] 張英才, 陳虹. 鈦/鋼復合材料熱等靜壓擴散焊的研究[J]. 稀有金屬, 1994(6): 463-466.
[8] 王敏敏, 趙永慶, 周廉. 影響鈦合金蠕變行為的因素分析[J]. 稀有金屬材料與工程, 2002, 31(2): 135-139.
[9] XIAN A P, SI Z Y. Interlayer design for joining pressureless sintered sialon ceramic and 40Cr steel brazing with Ag 57 Cu 38 Ti 5, filler metal[J]. Journal of Materials Science, 1992, 27(6): 1560-1566.
[10] 竇雙云, 胡強年. 大型鈦-鋼復合板容器的焊接[J]. 焊接技術, 2008, 37(1): 27-29.
[11] 周榮林. 鈦合金與00Cr18Ni10不銹鋼擴散連接及界面行為研究[D]. 哈爾濱: 哈爾濱工業大學, 2002.
[12] 宋庭豐, 蔣小松, 莫德鋒,等. 不銹鋼和鈦合金異種金屬焊接研究進展[J]. 材料導報, 2015, 29(11):81-87.
[13] CHUNG T, KIM J, BANG J, et al. Microstructures of brazing zone between titanium alloy and stainless steel using various filler metals[J]. Transactions of Nonferrous Metals Society of China, 2012, 22(增刊3): 639-644.
[14] 楊廣建. 鈦合金與奧氏體不銹鋼的真空釬焊試驗研究[D]. 合肥: 合肥工業大學, 2016.
[15] WATANABE T, HIGO Y, MIKI T, et al. Brazing of titanium with Ag-based filler metals in the air[J]. Quarterly Journal of the Japan Welding Society, 1994, 12(4):502-508.
[16] GAO Y, LI D F, HU J. Study on Brazing Alloy and Vacuum Brazing Welding Technology of TB2 Alloy/Steel[J]. Hot Working Technology, 2007, 36(15): 22-24.
[17] DONG Z H, FAN H Y. Effects of Ag-based brazing filler metals on Ti alloy/ST brazing seam[J]. Rare Metals & Cemented Carbides, 2004(3):14-17,31.
[18] 李慧芳. 鈦/鋼感應釬焊的AgCuZnNi釬料的研制及工藝性研究[D]. 蘭州: 蘭州理工大學, 2013.
[19] LEE J G, HONG S J, LEE M K, et al. High strength bonding of titanium to stainless steel using an Ag interlayer[J]. Journal of Nuclear Materials, 2009, 395(1): 145-149.
[20] 馬馳原. Ni層對鈦/鋼釬焊接頭組織和性能的影響機制[D]. 蘭州: 蘭州理工大學, 2014.
[21] SHIUE R K, WU S K, SHIUE J Y. Infrared brazing of Ti-6Al-4V and 17-4 PH stainless steel with (Ni)/Cr barrier layer(s)[J]. Materials Science & Engineering A, 2008, 488(1): 186-194.
[22] 楊仲林. 鈦合金/鋼異種金屬真空釬焊試驗研究[D].大連: 大連理工大學, 2013.
[23] 楊靜, 王飛, 朱金霞,等. Ag95CuNiLi釬料釬焊鈦合金與不銹鋼異種金屬的性能分析:Ⅱ釬焊性分析[J]. 焊接學報, 2004, 25(1): 48-51.
[24] YUE X, HE P, FENG J C, et al. Microstructure and interfacial reactions of vacuum brazing titanium alloy to stainless steel using an AgCuTi filler metal[J]. Materials Characterization, 2008, 59(12): 1721-1727.
[25] 劉士磊. 非晶釬料真空釬焊TC4鈦合金及不銹鋼的研究[D]. 鄭州: 鄭州大學, 2017.
[26]  TASHI R S, MOUSAVI S A A A , ATABAKI M M. Diffusion brazing of Ti-6Al-4V and stainless steel 316L using AgCuZn filler matel [J].Association of Metallurgical Engineers of Serbia, 2013, 19(3): 189-201.
[27] 祁凱, 于治水, 李瑞峰. 1Cr18Ni9Ti不銹鋼/Ti6Al4V鈦合金真空釬焊工藝研究[J]. 熱加工工藝, 2011, 40(19): 162-164.
[28] 張匯文. TC4鈦合金與1Cr18Ni9Ti不銹鋼釬焊工藝研究[D]. 哈爾濱: 哈爾濱工業大學, 2006.
[29] 薛忠明, 王奇娟, 曲文卿, 等. 鈦合金與不銹鋼高頻感應釬焊工藝試驗研究[J]. 航天制造技術, 2004(6):33-37.
[30] 王國建, 周健勇, 孫東,等. 工藝參數對TC4與1Cr18Ni9Ti不銹鋼釬焊接頭性能的影響[C]// 全國釬焊及特種連接技術交流會. 鄭州: [s.l.],2009.

相似文獻/References:

[1]耿開博.鋁管、不銹鋼管的高頻感應焊接[J].焊管,2009,32(11):29.[doi:1001-3938(2009)11-0029-03]
 GENG Kai-bo.High-frequency Induction Welding of Aluminum and Stainless Steel Pipes[J].,2009,32(3):29.[doi:1001-3938(2009)11-0029-03]
[2]蔣道頂,王寶金,陳 澤.軌道客車車頂架用多功能不銹鋼異形管成型工藝設計[J].焊管,2011,34(11):42.[doi:1001-3938(2011)11-0042-04]
 JIANG Dao-ding,WANG Bao-jin,CHEN Ze.Forming Process Design of Multifunctional Stainless Steel Special Pipe Used in the Ceiling Rack of Railway Passenger Train[J].,2011,34(3):42.[doi:1001-3938(2011)11-0042-04]
[3]張希川,李 健,張瑞濤,等.管道內壁不銹鋼焊條堆焊的耐腐蝕工藝研究[J].焊管,2012,35(8):9.[doi:1001-3938(2012)08-0009-04]
 ZHANG Xichuan,LI Jian,ZHANG Ruitao,et al.Research on Corrosion Resistance Process of Stainless Steel Electrode Overlaying Welding on the Inner Wall of Pipeline[J].,2012,35(3):9.[doi:1001-3938(2012)08-0009-04]
[4]吳通良.超長奧氏體不銹鋼焊管光亮固溶處理工藝改進[J].焊管,2013,36(7):34.[doi:1001-3938(2013)06-0034-04]
 WU Tongliang.Super-long Austenitic Stainless Steel Welded Steel Pipe Continuous Bright Bolid Solution Treatment Process Improvement[J].,2013,36(3):34.[doi:1001-3938(2013)06-0034-04]
[5]付現橋,徐 敬,卜明哲,等.L360QS/316L不銹鋼復合鋼管焊接工藝和性能研究[J].焊管,2014,37(2):48.[doi:1001-3938(2014)02-0048-05]
 Fu Xianqiao,XU Jing,BU Mingzhe,et al.Welding Process and Performance Study on L360QS/316L Stainless Steel Clad Pipe[J].,2014,37(3):48.[doi:1001-3938(2014)02-0048-05]
[6]陳茂軍,靳全勝.TIG焊接不銹鋼管工藝對焊縫質量的影響[J].焊管,2014,37(7):46.[doi:1001-3938(2014)07-0046-03]
 CHEN Maojun,JIN Quansheng.Influence of TIG Welding Process for Stainless Steel Tube on Weld Quality[J].,2014,37(3):46.[doi:1001-3938(2014)07-0046-03]
[7]雷曉維,馮耀榮,張建勛,等.不銹鋼焊接接頭腐蝕行為研究進展[J].焊管,2015,38(2):37.[doi:1001-3938(2015)02-0037-05]
 LEI Xiaowei,FENG Yaorong,ZHANG Jianxun,et al.Research Progress of Corrosion Behavior of Stainless Steels Welded Joints[J].,2015,38(3):37.[doi:1001-3938(2015)02-0037-05]
[8]楊 凱,王永軍,云海濤,等.TC4鈦合金薄壁圓管縱縫TIG焊接模擬與分析[J].焊管,2015,38(7):6.[doi:1001-3938(2015)07-0006-05]
 YANG Kai,WANG Yongjun,YUN Haitao,et al.Simulation and Analysis on Longitudinal TIG Welding of TC4 Titanium Alloy Thin-walled Circular Tube[J].,2015,38(3):6.[doi:1001-3938(2015)07-0006-05]
[9]潘 強,劉爾璽,馮淳元,等.Q235鋼板表面堆焊不銹鋼改性處理[J].焊管,2017,40(4):22.[doi:10.19291/j.cnki.1001-3938.2017.04.005]
 PAN Qiang,LIU Erxi,FENG Chunyuan,et al.Q235 Steel Plate Surface Overlaying Stainless Steel Modified Process[J].,2017,40(3):22.[doi:10.19291/j.cnki.1001-3938.2017.04.005]
[10]張 峰,等.鈦合金油井管應用研究現狀及進展[J].焊管,2017,40(11):7.[doi:10.19291/j.cnki.1001-3938.2017.11.002]
 ZHANG Feng,HUANG Wenke,LI Yuanzheng,et al.Application Research Status and Progresses of Titanium Alloy OCTG[J].,2017,40(3):7.[doi:10.19291/j.cnki.1001-3938.2017.11.002]
[11]許貴芝 編譯.不銹鋼與鈦合金的轉接管的焊接[J].焊管,2009,32(11):70.[doi:1001-3938(2009)11-0070-03]
 Edited and Translated by XU Gui-zhi.Welding Between Stainless Steel and Titanium Alloy Different Diameter Transfer Tube[J].,2009,32(3):70.[doi:1001-3938(2009)11-0070-03]

備注/Memo

備注/Memo:

收稿日期:2018-12-24

作者簡介:劉 陽(1994—),男,碩士,目前主要從事鈦合金與異種金屬及金屬基復合材料的釬焊研究。

更新日期/Last Update: 2019-04-19
双色球胆码预测公式